Today we introduce epoxy phenolic resin paint, which is a high-performance, high-crosslinking, two-component epoxy phenolic tank paint with outstanding heat and solvent resistance.
All surfaces to be coated with epoxy phenolic resin paint used in epoxy drum closure should be clean, dry, and free of contaminants. Prior to painting, all surfaces should be evaluated and treated according to the ISO 8504:2000 standard. Weld spatter should be removed as necessary and weld seams and sharp edges should be ground smooth. If there is grease, it should be cleaned with solvents according to SSPC-SP1.
Spray treatment: This product can only be applied to surfaces that have been sandblasted to achieve Sa2 1/2 (ISO 8501-1:2007) or SSPC SP10 standards. A surface roughness of 50-75 microns (2-3 mils) is recommended. Epoxy phenolic resin paint must be applied before steel surfaces oxidize. If oxidation does occur, the entire oxidized area should be re-sandblasted and meet the mentioned standards.
Surface defects exposed during sandblasting should be treated appropriately by grinding, filling, or other methods. Before oxidation occurs, epoxy phenolic resin paint (diluted with 10% epoxy thinner) can be used as a primer with a dry film thickness of up to 40 microns (1.5 mils). Alternatively, dehumidification equipment can be used to maintain the sandblasting effect. Detailed epoxy phenolic resin paint application procedures should be consulted before use.
Epoxy phenolic resin paint is usually specified as a three-coat paint system, with each coat thickness of 90 microns (3.6 mils) and a total dry film thickness of the paint system of 270 microns (10.8 mils). Exact specifications of the total dry film thickness depend on specific requirements for the final use.
Epoxy phenolic resin paint is suitable as an inner lining for storage and processing containers in petrochemical plants, resisting the corrosion of acidic crude oil with temperatures as high as 95℃ (203°F) and water from gas separators. It has good resistance to aromatic and aliphatic solvents.
Water - Based Paint Coating Several Technical Requirements AnalysisJuly 1, 20223. How to construct: waterborne paint can be painted and sprayed.The area is not large, brush construction: waterborne paint brush is recommended to use waterborne nylon brush construction, along the ...view
MySteel: The Price Of Steel Went UpJuly 1, 2022After the Spring Festival, the orderly resumption of work and production of all walks of life, domestic steel prices welcome a good start, as the "flower of iron and steel" tinplate is not w...view
The Fourth Session Of The Standing Council Of China Packaging Federation Was Successfully Held in ShanghaiJuly 1, 2022On July 13, 2021, China packaging federation ninth session of the standing council four times in Shanghai, China packaging federation President li hua, vice President and secretary general Wang Yue me...view
This Modification Of The Import And Export Commodity Inspection Law Is Related To The Packaging Of Export Commodities!July 1, 20221. Amendments to the Road Traffic Safety Law of the People's Republic of ChinaThe first paragraph of Article 20 is amended to read: "The driving training of motor vehicles shall be socialized...view
How to Select a Great Closure System for My Steel Drum?April 2, 2022How much attention you put on steel drum closure system? It is the “last close” of drum factory and the “first open” of drum user, as well as the only connection of inner content and outter enviro...viewWhat Are The Precautions For Environmental Protection Acceptance For Construction Projects Involving The Renovation Of Old Barrels?July 1, 20222. On-site investigation①Contrasting with the EIA report and approval documents, verify on-site whether the actual construction content, production scale, production process, product plan, raw and au...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
