Purpose of revision
The purpose of this revision is to meet the needs of efficient and reasonable safety management of food utensils, containers and packaging and the development of related industries.
Overview of revised contents
About recycled plastics: the general manufacturing standards and the recycling standards of recycled plastics in the standards and specifications for food utensils, containers and packaging were revised.
About active and intelligent materials: new manufacturing standards for active and intelligent materials have been added.
About synthetic resin: according to the structural characteristics of synthetic resin materials are classified, and according to the order of the classification table index to the specific provisions of the material. In addition, polyketide was added to the synthetic resin.
About migration test: the concept of fatty food was clarified.
About test methods: the test methods of colorants and sulfur dioxide were revised.
Main contents of revision
The original part II "general specifications and standards" is revised as follows
1. Revision of standards for the use of recycled plastics (Amendment II. 1)
The scope of permitted use of recycled plastics which have been proved to be safe has been expanded; At the same time, the corresponding standards are formulated to allow the use of physically recycled polyethylene terephthalate (PET) raw materials in the direct contact layer with food.
2. New manufacturing standards for active and intelligent containers and packaging (Amendment II. 1)
In order to meet the needs of technological development and enhance the coordination between related industries and international trends, new manufacturing standards for active and intelligent containers and packaging have been added.
Flow Hangs, The Ills in The Spraying Process!July 1, 2022In the process of paint construction, excessive paint in vertical or inclined areas and the formation of top-down flow traces or local film thickening flow falling phenomenon is called flow hanging.Th...view
PetroChina Achieved Net Profit Of 27.7 Billion Yuan In The First Quarter!July 1, 2022On April 29, China national petroleum co., LTD. (hereinafter referred to as the "company"), announced the first quarter of 2021, the company seize the macro economic recovery and rebound in ...view
Packaging Market And Development Trends In North AmericaJuly 1, 2022North America is the world's second largest packaging market after China. As of 2017, the apparent packaging consumption in North America was approximately US$2030 billion. Although packaging in N...view
Installation Instructions For 210L Open Steel Drum ClosureJuly 1, 2022Installation instructions for 210L open steel drum closure1. During the installation of the steel barrel sealer, the operator must wear appropriate gloves.2. the use and steel drum matching bucket hoo...view
Why Do Steel Drum Bung Use R-Type Plug Barrel?April 10, 2023Standard steel barrels have a plug barrel made of steel. A gasket is designed at the cylindrical neck of the plug, just under the edge. Due to these designs, when the plug is tightened, the gasket may...viewInternational Analysis of the Steel Drum MarketJune 5, 2023For a long time,55 gallon steel drums have been considered the mainstay of chemical industry packaging, and the most widely used industrial packaging for many types of hazardous and non-hazardous mate...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
