The barrel-making materials must meet the following requirements:
(1) The barrel-making needs to use high-quality low-carbon steel, the material must have good plasticity and deformation stability, and the low-carbon steel with a carbon content of not more than 0.05% to 0.15% has good plasticity. The greater the elongation δ value, the greater the plasticity. The better, the smaller the yield ratio σs/σb, the better the plasticity. For plates with a thickness of 0.8~2mm, the standard grain size should be grade 5~99.
(2) The material should have the ability to resist pressure instability and wrinkle. This ability is related to the modulus of elasticity (E), the yield ratio and the plate thickness directivity coefficient r. When σs/σb is small, the ultimate deformation degree is large. The greater the r value, the greater the degree of deformation.
(3) The surface of the steel plate should be standard and clean, free from scratches, pitting, scratches, pores and shrinkage, and the flatness of the surface should meet the standard, without warpage, unevenness, and rust spots. Thickness tolerance and overall dimension tolerance should comply with national standards. For details, please refer to industry standard YB/T 055. For example, for cold-rolled and zinc-locked thin steel plates for 200L steel drums, the allowable deviation of the chemical composition of the finished steel plates and steel strips should meet the requirements of GB/T 222-2006. The size measurement method of steel plate (strip) should meet the requirements of GB/T 708-2019. The re-inspection of steel plates shall be carried out in accordance with GB/T 247-2008.
Short comment: When making steel drums, you need to use good raw materials. At the same time, the drum closure of steel drums also needs to have good quality. The sealer provided by CX is made of high-quality steel and the surface is galvanized, which not only enhances the service life of the drum closure, but also prevents the sealer from rusting.
Development History of Malleable IronApril 24, 2023During the First World War, the core issue of concern for wartime rations was whether they could reduce the losses caused by long-term transportation and storage. Glass packaging was not ideal due to ...view
A Sudden! Nearly 40 Barrels Of Chemicals Have Leaked! The Main Person in Charge Is Under Police Control!July 1, 2022According to the emergency management bureau of Wuhan Jiangan District, a chemical leak occurred at around 5 o 'clock on August 29 in room 807 of Kaixin Building, a commercial and residential buil...viewPromote The Development Of Recycling Standards For Scrap Steel Drums With China's Environmental Labeling Product CertificationJuly 1, 2022From April 18 to 21, 2021, in order to understand the production level and market status of the scrap steel barrel recycling product industry, take the "Scrap Steel Barrel Recycling" group s...viewThe 2021 Transport Packaging Technology Organization Annual MeetingJune 30, 2022The 2021 Transport Packaging Technology Organization Annual Meeting was successfully held in Huzhou city, Zhejiang Province on September 28-29, 2021.This annual conference is co-hosted by the Internat...view
Development of Steel Drum Industry in Different RegionsApril 10, 2023Japan (JSDA)Approximately 85% of steel drums in the Japanese market are used for chemicals. The Japan Steel Drum Association (JSDA) participated in TOKYO PACK 2022 exhibition for the first time to str...viewThe 100th Anniversary Of The Founding Of The Party, A Centennial Memorabilia Of China's Steel Drum Packaging Industry!July 1, 20221908~1921British Asia Oil Company established China's first steel barrel factory in Yingkou, China-Asia Oil Company Yingkou Oil Depot. Later, Mobil Oil Company established China's second steel...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
