Email Us

Installation And Operation Manual Of Open Steel Drum Closure

This is the installation instruction for 210 liter open drum closure, taking the clamp locking ring as an example.


1. The operator must wear appropriate gloves during the installation of the steel barrel locking ring.


2. Use the hoop, cap and washer individually which should be all matched with the steel drum, and do not mix them together while using.


3. Check that the gasket on the cover is correctly installed in the groove of the cover.

Installation And Operation Manual Of Open Steel Drum Closure

4. Place the cover on the steel drum and carefully fix the sealing washer at the barrel opening coil of the steel drum.


5. The tightening direction of the closer lever wrench is clockwise. Fix one end of the lever in a proper position with one hand and press the sealing ring down along the circumference of the cover until it is safely fixed at the coil at the barrel opening.

Installation And Operation Manual Of Open Steel Drum Closure

6. Slowly pull the lever until it is completely closed to the edge of the barrel hoop. Compress the washer to lock the end.


7. Fix the lever and barrel hoop hole with the sealing device.

Installation And Operation Manual Of Open Steel Drum Closure

Short comments: Once the open steel drum locking ring for liquid goods is installed, it should be already filled with goods and cannot be opened again during transportation. If it is opened before transportation to the destination, the sealing performance of the steel drum can not be guaranteed to comply with the provisions of the United Nations.

Popular Drum Barrel Fittings

Related Drum Accessories and Fittings News & Blog

  • The Future Of Packaging IndustryThe Future Of Packaging IndustryJune 30, 2022According to the research of Smithers in the future of packaging: long term strategic forecast to 2028, by 2028, the global packaging market will grow at an annual rate of nearly 3%, reaching more tha...view
  • Environmental Progress Of Steel Barrel SealerEnvironmental Progress Of Steel Barrel SealerJuly 4, 2022The electroplating, coating and other processes of steel drums in the production process are the major causes of water pollution and air pollution.So in the cause of environmental protection, our stee...view
  • Kinds Of Drum Closure Gasket3Kinds Of Drum Closure Gasket3July 1, 20227. CR neoprene sealing ringSunlight and weather resistance is especially good.Not afraid of dichlorodifluoromethane and ammonia and other refrigerants, resistance to dilute acid, silicone grease lubri...view
  • Guide To International Standard Dimensions For Steel Drum SeriesGuide To International Standard Dimensions For Steel Drum SeriesJune 30, 2022This table is the ISO recommended guide for the design of dimensions for a series of steel drums. The corresponding table of diameter and height series of steel drums with capacity from 2 litre to 220...view
  • A Guide to UN-Rated DrumsA Guide to UN-Rated DrumsAugust 1, 2023UN ratings, established by the United Nations, are an essential system for classifying and identifying the level of safety and suitability of containers used to transport hazardous materials. These ra...view
  • The Development Of IBC in The Current Market Is Getting BetterThe Development Of IBC in The Current Market Is Getting BetterJune 30, 2022The development of IBC in the current market is getting better. The use method of container barrels is quite simple and convenient. There is a valve under the container barrel that can put materials. ...view
Tel
86-18768445568
Address
No.58 Qinjian Road, Hengshan Industrial Park, Shouchang Town, Jiande City, Zhejiang Province, China